PAAM Grafted Friction Reducer
CB-DR-PAAM
TECHNICAL SPECIFICATION
CHEMICAL ANALYSIS:
| APPEARANCE | White to yellow Powder |
| PARTICLE SIZE | 150 Mesh |
| MOISTURE | 7%-10% Maximum |
| PROTEIN | 5% Maximum |
| ASH | 1% Maximum |
| AIR | 5% Maximum |
| FAT | 1% Maximum |
| GUM CONTENT | 78% Minimum |
| pH | 6-7 |
BROOKFIELD VISCOSITY
Cold Viscosity, 1% Sol., taken by (BROOKFIELD VISCOMETER), SP. NO.4 / 20 RPM AT 25 DEG. C:
After 2 Hours – 3500 CPS Minimum
After 24 Hours – Stable or more
FANN 35 Viscosity, 40ppt gel, 2% KCl water, 1 Minute hydration, pH = 6.5, R1B1, 511s-1
3 Minutes: 30 ± 2 cps
5 Minutes: 32 ± 2 cps
60 Minutes: 36 ± 2 cps
GRANULATION:
ON 40 MESH Nil
ON 100 MESH 5% Maximum
THROUGH 100 mesh 95% Maximum
THROUGH 200 mesh 20% Maximum
APPLICATION
- As a friction reducer (drag reduction ratio up to 70 %) used in 1 gallon in 50-50 ration to 1000 gallon with petroleum distillates/ mineral oils are 0.1%.
- Can be directly used as flay on wheel.