Friction Reducer-Hydrophobic Guar
CB-DR-FR
TECHNICAL SPECIFICATION
CHEMICAL ANALYSIS:
| APPEARANCE | White to yellow powder |
| PARTICLE SIZE | 150 Mesh |
| MOISTURE | 8-10 % Maximum |
| PROTEIN | 5% Maximum |
| ASH | 1% Maximum |
| AIR | 5% Maximum |
| FAT | 1% Maximum |
| GUM CONTENT | 78% Minimum |
| pH | 7-9 |
BROOKFIELD VISCOSITY
Cold Viscosity, 1% Sol., taken by (BROOKFIELD VISCOMETER), SP. NO.4 / 20 RPM AT 25 DEG. C:
After 2 Hours – 3500 CPS Minimum
After 24 Hours – Stable or more
FANN 35 Viscosity, 40ppt gel, 2% KCl water, 1 Minute hydration, pH = 6.5, R1B1, 511s-1
3 Minutes 30 ± 2 cps
5 Minutes 32 ± 2 cps
60 Minutes 36 ± 2 cps
GRANULATION:
ON 40 MESH: Nil
ON 100 MESH: 5% Maximum
THROUGH 100 mesh: 95% Maximum
THROUGH 200 mesh: 20% Maximum
APPLICATION
- Can be used as friction reducer in pipelines. 0.1% concentration is enough for 75% drag reduction.
- Can be us used fly on wheels or in slurry form with petroleum distillates/ mineral oils.